The point of this assignment is to create a two-way authentication system using python. It should use twilio to send messages to the user for authentication. It also needs a GUI made with the python module Tkinter. All other specifics will be in the attached proposal document and any solution should try to stick to the proposal as close as possible. All instructions on what is exactly needed will also be attached.
Category: Desktop software development
Write Python code including object-oriented classes for a robot car’s major components: Controller(Raspberry Pi), Sensor(Anti Collision Sensor, End effector(Wheel), and Actuator(Motor).
Each of these component classes will be used to create objects that will be a part of the car robot’s type. At least one object of each of the component types must be a member of the car’s class: one robot object will have one controller and at least one object of the rest of the component classes. These component objects will be data variables of the car’s class meaning that when a car object is created, it will contain a software representation of each component, making the class a proper simulation.
(a) Define a constructor function that defines and initializes the data variables
(b) Declare objects for at least one of each robot component described as data variables
(c) Add code to make your car trigger its controller to activate its other components
(d)Add code to make your car read the value of its sensor
The Controller class:
(a) Must declare a function that can read data from a sensor object. The object is
passed in as a parameter to the function
(b) Must declare a function that sends a signal to an actuator object. The object is
passed in as a parameter to the function
i. It must print out the label/type of the controller sending the signal, and the
type of the actuator receiving it, and the signal being sent (use a string like
go if you wish)
(c) Must define a class data variable for the type/label of the controller (for example
microprocessor). Make it a string type
The Sensor class:
(a) must declare a class data variable that stores the type of sensor, as a string
(b) must declare a class data variable that hold the data value for this sensor
(c) must define a function that returns data value retrieved from this sensor
In the function body, print out what is happening
The Actuator class:
(a) must declare a class data variable that stores the type of this actuator as a string
(e.g. motor)
(b) must declare a class data variable to store the end effector object that this actuator
will actuate
(c) must declare a function that applies motion to an end effector object that is passed
in as a parameter.
In the function print out what is happening to the object
The End Effector class:
(a) must declare a class data variable that stores the type of this effector as a string
(e.g. wheel)
(b) must declare a function that manipulates a real-world object that is passed in as
a parameter
The real world object can be stored as an object or as a string, at your option.
In the function body code, print out what is happening to the object
Please see attached PDF
Deliverables for this project include the following:
1. Source code correctly implementing all required functionality.
2. Word or PDF file providing screenshots of successfully compiling and executing the program.
3. Description of the process and lesson learned while completing this project (to be included in the Word or PDF document).
4. A test plan that contains test cases that include both layout types, all widgets and nested panels. For each test case, the input file should be shown together with the resulting GUI. (to be included in the Word or PDF document
Assessment Instructions
In this assessment you will complete a program to demonstrate the learning competency skills for your selected language path.
Using the language C#, please complete the following assessment:
In this hypothetical scenario, you will create a program that will allow a student to register for certification classes in HVAC. The school offers a $150 discount if the student signs up for twenty or more unit-hours. Students may also pay the tuition costs over a twelve-month period.
Assessment Requirements
Your program should declare variables using the appropriate data types to store the following string values.
Name: John Smith
Address: 101 N. Main Street
City: AnyTown
State: TX
Units Taken: 19
For the price per unit, declare a constant numeric variable to contain the decimal value 100.50.
For the twenty unit-hour discount, declare a constant numeric variable to contain the whole number 150.
Convert the string value for Units Taken to an integer data type andplace the converted numeric value into a separate numeric variable.
Hint: Use the same name but add the prefix int such as intUnitsTaken.
Using the increment operator, increment the variable above by 1 so that the value 19 will now be 20.
Multiply the constant variable for price per unit by the units taken and place the answer in a variable named tuition.
Subtract the constant discount value from tuition and store the answer in a variable named afterDiscount.
Divide the discounted tuition by 12 and store the answer in a variable named monthlyPayment.
Finally, your program will display the following data using the respective variables for each item:
Name
Address
City
State
Zip Code
Number of units taken (numeric value that was incremented)
Tuition before discount
Tuition after discount
Monthly Payment
Include labels for each item as shown in expected output. Format the tuition values and monthly payment as currency.
EXPECTED OUTPUT
Name: John Smith
Address: 101 N. Main Street
City: Anytown
State: TX
Zip Code: 11111
The number of units taken is: 20
The tuition before discount is $2,010.00
The tuition after twenty-unit discount is $1,860.00
Your monthly payment is $155.00
Directions for Submitting Your Assessment
The source code file is the file in your project that contains the code you wrote. You will only need to submit the source code file for your program and not the entire project folder or any additional project files. Below are listed the file extensions for the source code file for each language:
.cs file for C#
Naming Your Project and Source Code File
While you can change your file name later, it will be simpler with less chance of confusion if you name your new project and code file with the following naming convention when you create it. The code file(s) should be saved as: IT213M1_YourLastName_Language. The source code file and the project name can be the same.
Using Monte Carlo Simulations to create the best schedule for a pharmaceutical manufacturing site
Create a new schedule system where you input any number of orders ie enter ORD001 and press enter then enter ORD002 etc. When all the orders are entered you press the GET BEST SCHEDULE button and the simulation outputs the best schedule for all these orders. I want a very simple window (front end) code containing a box to enter the order numbers and a grey button for the get best schedule button and somewhere you get the output schedule (using Java).
The best schedule will be the schedule with the least amount of unused days. The object is to optimise the use of all machines and people so that the least amount of downtime is created. The only random thing in the whole simulation will be the start date ie the date when each product will start to be manufactured. The end date is the date given in the order table Order_Required_By. Ideally all the products would be produced simultaneously but the contraints of people and machines prevents this happening so the simulation will give the most workable solution to get the products made as quickly as possible. I want to use something like this for the picking random dates for the start date.
import scala.util.Random
import java.time.LocalDate
// val start = LocalDate.of(2020, 1, 20)
// val end = LocalDate.of(2020, 2, 12)
LocalDate.ofEpochDay(Random.between(start.toEpochDay, end.toEpochDay))
// LocalDate = 2020-01-26
Create a 10 x 10 two dimensional array of int data type (Remember that arrays start with 0, not 1.
– Load each index in the array with the multiplication of each (row * column) location
– Using printf display the content of each index, ALIGNED.
– Create an algorithm using a loop that will add all the values in all odd columns, and print their total aligned below the column.
– Print the addition of all values in each index in the array. This is a sum of all the elements of the array.
A Java submission must compile and run from the command line or it will earn a 0 and
will not be graded further. Do not include package statements or this will happen.
Create a 10 x 10 two dimensional array of int data type (Remember that arrays start with 0, not 1.
– Load each index in the array with the multiplication of each (row * column) location
– Using printf display the content of each index, ALIGNED.
– Create an algorithm using a loop that will add all the values in all odd columns, and print their total aligned below the column.
– Print the addition of all values in each index in the array. This is a sum of all the elements of the array.
A Java submission must compile and run from the command line or it will earn a 0 and
will not be graded further. Do not include package statements or this will happen.
Need this assignment written up in C#, the top 10 displayed movies algorithm can be done using a bubble sort algorithm
A demonstration can be seen here: https://echo360.org.au/lesson/cc8d6b2c-197e-43c3-97fd-54aae4e48620/classroom#sortDirection=desc
and also here: https://echo360.org.au/lesson/fe8df1dc-bc25-4edd-a012-4c145a39b56c/classroom#sortDirection=desc
I have attached the project specification as well, if it can be done ASAP that would be awesome. Also the binary tree code is in the Zip file as well
Thanks
I’m looking for help to complete my assignment that requires me to make a text based game. I wanted to build a turn-based battle card game that would be a simple version of Hearthstone. I came up with the UML diagram, rules, requirements, displayer example and the different types of cards. Thank you
I have provided a zip file with the assignment instructions and files necessary to complete the assignment. I have also included the instructions below.
In chapter 9 of your Deitel & Deitel text, you studied an inheritance hierarchy in which class BasePlusCommissionEmployee inherited from class CommissionEmployee. However, not all types of employees are CommissionEmployees.
In this exercise, youll create a more general Employee superclass that factors out the attributes and behaviors in class CommissionEmployee that are common to all Employees. The common attributes and behaviors for all Employees are firstName, lastName, socialSecurityNumber, getFirstName, getLastName, getSocialSecurityNumber and a portion of method toString.
Create a new superclass Employee that contains these instance variables and methods and a constructor.
Next, rewrite class CommissionEmployee from Section 9.4.5 as a subclass of Employee. Class CommissionEmployee should contain only the instance variables and methods that are not declared in superclass Employee. Class CommissionEmployees constructor should invoke class Employees constructor and CommissionEmployees toString method should invoke Employees toString method.
Once youve completed these modifications, run the BasePlusCommissionEmployeeTest app using these new classes to ensure that the app still displays the same results for a BasePlusCommissionEmployee object.
Make sure that your screen shots show your program running and that your runtime display shows that your program does all that is required of it. You only get credit for what you demonstrate.
