Warm-Up Activity 5.1: How to Prepare an Annotated Bibliography
In this assignment, you will prepare an annotated bibliography of resources that you have gathered on various topics throughout the course. Visit the Academic Success Center OR the Dissertation Center available from the CTL for tips and resources on how to write Annotated Bibliographies. Both of these resources are available in the books and resources for this week.

Please note that the same rules for citation that apply to other documents (such as proper paraphrasing and the use of quotation marks where necessary) apply to Annotated Bibliographies as well. It is not acceptable to cut and paste from the abstract or the body of an article. Rather, the student is expected to read the article completely and appropriately paraphrase the necessary material. For those few situations where paraphrasing is not acceptable, then material that has not been paraphrased needs to be placed in quotation marks. Please refer to the Northcentral University Integrity Policy and tutorial for more information on this.

Assignment

Your task this week is to prepare an annotated bibliography of least 10 references from peer-reviewed journals that will assist you in preparing your Signature Assignment. Your Signature Assignment, due in Week 8, asks you to prepare a proposal for an employee engagement program. At least two of the articles should address the importance of job design in employee engagement.

Follow the illustration below to determine what material is needed for the annotation in each entry. Note there are four sections to the entry: hypothesis, methodology, conclusion, and evaluation. Be sure to include each of these sections in your annotated bibliography entries. For information on annotated bibliographies, visit the “Conducting Research” and “Forms of Writing” sections in the Northcentral University Writing Center (click the links in the left side navigation area of the Writing Center screen).

Length: At least 10 research articles

Your annotated bibliography should demonstrate thoughtful consideration of the ideas and concepts presented in the course and by providing new thoughts and insights relating directly to this topic. Your response should reflect scholarly writing and current APA standards.

BUILDING WORKPLACE RELATIONSHIPS
Assignment Overview

In this assignment you are an applicant who has been asked the following question during a job interview for a supervisory/management position:

Tell me about a time you had to deal with a conflict and discuss its outcome.

After watching and reflecting upon the video below, prepare your response following the principles learned in this video.

Prepare a 5- to 6-minute video of you responding to that question.
Also prepare a 2- to 3-page outline of how you addressed the ideas found in the video. Include a Reference list of at least two sources you utilized to prepare your submission.
Upload your video to the drop box by the Module due date.

Note: If you have difficulty uploading your submission, it could be because the internet connection is too slow and because of the size of your video, and the upload may time out.

However, these files can be uploaded to YouTube and the link shared. Set as public or unlisted, NOT PRIVATE. Unlisted means your video/slide presentation will not come up in search results. Only those who know the link can view it, even if they do not have a YouTube account/username.

Important: Put the link to your video in a Word document and submit your Word document along with your outline document in the drop box.

(AccelaCoach, 2017)

AccelaCoach (2017). How to Answer: Interview Questions on Resolving Conflict. Retrieved from https://www.youtube.com/watch?v=Kqssla8dazc

Referencing the attached case study (BOLDFlash) along with the attached Areas of Focus and Framework paper, submit a written report in which you discuss how you will approach training the Mobile Division management team and communicating the new guidelines to existing employees.

Specifically, the following critical elements must be addressed:
1) Training Plan: Communication – determine the communication strategies you will incorporate in all areas of focus, and describe why. Discuss how these communication strategies are appropriate for those individuals to whom your training is directed. Provide evidence to support your conclusions.

2) Training Plan: Collaboration – discuss the collaboration strategies you incorporate in communicating with all areas of focus. Determine the collaborative structure and strategies that will help the various managers and directors throughout and after their training experiences. Why are these appropriate? Who will be collaborating? Provide evidence to support your conclusions.

3) Training Plan: Method(s) – determine the training method(s) you will use (how will you share your training with trainees and other stakeholders) in your chosen area of focus. Your method must be appropriate for the audience to which you want to communicate. Justify your choice(s) of methods with research.

4) Specify Guidelines – identify the key steps of your framework for creating successful communications in your chosen area of focus. Keep in mind the various audiences that need the information. Remember that your guidelines need to be detailed for the management team to follow, clear for your colleagues to understand, and accurate to ensure that the resulting communications are successful. Discuss how you will approach training the Mobile Division management team and communicating the new guidelines for communication to them.

At least 10-15 reference, thanks.

A critical literature review relating to leadership, leadership competencies and relevant self-awareness frameworks and the extent to which reliable knowledge about the characteristics of an effective leader and leadership in SME can be determined 1,400 words.

* A critical review of the meaning and importance of leadership for organisations using a range of academic definitions and references (400 words)
A critical review of the competences required for leadership drawing on a range of academic and professional sources (500 words)
A Critical review of the meaning and importance of ethical leadership drawing on a range of academic and professional sources (500 words)

Guidance for Module Learning Reflective Log

A good learning reflective log entry will show:

Some evidence of critical thinking and analysis, describing your own thought process about your learning and personal development, and what you have learnt from the module;
Some self-awareness demonstrating openness and honesty about performance along with some consideration of your own strengths and weaknesses, achievement of personal aims and objectives; challenges faced and how you resolved them;
Some evidence of learning, appropriately describing what needs to be learned, why and how.

Follow the courseware and write a minimum of 6 logs with the template. I have uploaded the courseware and the template, please have a look.

Communicating a clear professional brand with an audience requires aligning your message with effective visual design principles and delivering that message in an authentic and engaging fashion. Now that you’ve developed the content and design for your Professional Brand Presentation Outline, the last step is to deliver your message.

For your Module 6 – Assignment: The Professional Brand Presentation, your goal is to record a presentation of your voice speaking your message over your presentation slides.

Instructions

Before beginning your presentation slides, it is important to have completed your Module 6 Readings, Videos, and Lessons. It will also be a good idea to look at any instructor feedback on your Professional Brand Presentation Outline and Slides.

Part One: Practicing Your Presentation

Rehearse your presentation several times with a stopwatch. This practice allows you to meet the required timeframe for the Brand Yourself Presentation: 4-5 minutes.

As you practice with a stopwatch, consider what you need to change and adapt to ensure your presentation is 4-5 minutes. Make decisions about cutting and adding sentences, editing, and rewording sentences, and changing or re-arranging sentences to stay on track for time.

The more you practice, the more naturally you will be able to present your brand. Remember that since this project is an extension of yourself, your goal is to speak as naturally and authentically as possible. Do not read from a script. If you find yourself reading, reduce the amount of words in your Presenter’s Notes. The more you practice, the stronger and more effective your presentation delivery will be!

Part Two: Recording Your Presentation

Once you’ve practiced a few times and confirmed with your stopwatch that you are on track for time, you’re ready to record your presentation. You will narrate your slideshow, so in PowerPoint or Keynote, you will record your voice speaking over your slides.

For more information on narrating your slideshow, check out the following tutorials:

Tutorials:

How to record your voice over your PowerPoint slides (Links to an external site.)
How to record your voice over your Keynote slides (Links to an external site.)
Note: In Google Slides (Links to an external site.), you will need to download your presentation as a PowerPoint file and record your voice in PowerPoint
After recording your voice presenting over your slideshow, you are ready to submit your project.

Submission Instructions

You will submit a movie file (MOV or MP4) for this assignment. Name the file your surname, module number, and title of the assignment (e.g., surname_M6_ProfessionalBrandPresentation).

If you’re using PowerPoint or Keynote, “export” your slideshow as a movie file in MOV or MP4 format. This is the best way to ensure your slides and your delivery will be properly saved and in sync for your audience.

You have a few options for submitting your movie file:

You can upload your movie file directly to CanvasLinks to an external site.
You can upload your movie file to another file-sharing website (YouTube (Links to an external site.), Viddler (Links to an external site.), Vimeo (Links to an external site.), Dropbox (Links to an external site.), Google Drive (Links to an external site.)) and submit the URL for your project to Canvas
If you experience any technical difficulties in submitting your project, call the Canvas Support Hotline at 844-334-7579.

Please find the attached document which include the theories covered in the class.

A 1,500 words critical appraisal of your learning preference(s) results on the specific theories / models covered in the class.  This should include a discussion of the implications these results have for your learning development on this programme.  (40% weighting) (MLO4) AOL 4 COLLECTION POINT

This is a 2750 Report in my purchasing management class that asks us to to reflect and go into more depth on our negotiation plan and negotiations video the will be attached as link. More details will also be explained in a link below. (The last part on the negotiations strategy was based on Chris Voss negotiations master class. It will have to be sighted as for the rest of the info.)
Thank you

Cover Letter for radiology technology application for acceptance into the Community college of Denver! I provided my resume disclosing any personal information. I want the cover letter to include information on my resume and to correlate it into the healthcare and patient care as a radiology technician. Also, to include – why do i want to be a radiology technician…and any other important ideas you can think of that needs to be included in a healthcare cover letter         

INTRODUCTION
As a business manager, you may encounter situations that require a wide variety of communication responses. For this assessment, you will be creating a portfolio of communication documents. Please appropriately format each communication for the message type.
SCENARIO
Scenario 1:

You are a manager of a company that has recently purchased a smaller company. The purchased company has an existing product, which will now be part of your product offering. The product is a weight-loss supplement called Kamelon. The product has been very successful for the previous owner, but the company had a limited ability to adjust its manufacturing system to accommodate growth as well as a limited potential sales audience. Your role is to oversee and coordinate all aspects of launching the product from the newly acquired company. You have a far greater manufacturing capacity and more potential customers readily available because you already sell several weight-loss related products to a large base of customers.

Kamelon has been proven successful by a research study. The study consisted of 100 participants, 90% of whom lost at least 15 pounds over a reasonable time period. To date, the study participants have successfully maintained their weight loss by continuing to use the product. Of the users, 80% were able to maintain their weight loss with continued use of Kamelon. The 10% of study participants who were not successful may have been unsuccessful because they did not follow the programs protocol. An inherent risk in a weight loss product is the inability to determine whether the product has produced results or if the user has not followed directions. Dissatisfied customers present a challenge as a result.

Your success relies upon your external business partner, Synesthor Inc., who manufactures the pill casing for Kamelon. There is a need for 10,000 pills to be manufactured in the next three months to meet the demands of your customers. Synesthor Inc. is a manufacturing company located in a different country, and you will need to work closely with this partner to ensure their manufacturing operation is able to increase as needed in a just-in-time environment to meet sales demands. Your contacts name at Synesthor Inc. is Fatima Sousa.

You have received a customer complaint via the companys social media page. The customer is extremely dissatisfied, and the complaint has negatively impacted the companys image. The customers complaint is as follows: Kamelon does not work! Ive been using this for a week, and I havent lost anything! Im going on vacation in a couple of weeks and I was hoping to shed a couple of pounds before I left for my trip. Unfortunately, I do not foresee this happening. No one should buy this product! As a faithful member of several weight-loss groups, I will not recommend this product to anyone in my groups.

Scenario 2:

You are a manager in a small pharmaceutical distributor. Your company has been awarded the exclusive contract to distribute a new medication.

Nasaquil is an over-the-counter medication that has been approved to treat influenza. Nasaquil will compete directly with prescription antiviral medications.

Your company, through your sales and customer service representatives, already has extensive relationships with medical providers. There is great anticipation within the market about the potential efficacy of this new medication. According to estimates by the Centers for Disease Control and Prevention (CDC), from October 1, 2018, to February 16, 2019, there were approximately 19 million flu illnesses in the United States with about 89 million flu-related medical visits (Centers for Disease Control and Prevention, 2019). Initial clinical trials indicate this new Nasaquil medication may help to lower influenzas severity and duration; however, clinical trials only demonstrate a new medications efficacy in a small group of patients over a limited amount of time. Long-term product efficacy rates have not yet been established. As with all new medication launches, your company anticipates patient dissatisfaction if desired results are not achieved. In those cases, the company will work directly with the patient.

The success of Nasaquil relies upon an external business partner, Pruhart Tech, who manufactures the refrigerated casing designed specifically for this product. The product is required to be shipped overnight in a temperature-controlled package. Unfortunately, Pruhart Tech has limited refrigerated shipping containers, and the availability is restricted to weekend deliveries only. You will need to work closely with this partner to ensure their manufacturing operation is able to increase as needed in a just-in-time environment to meet sales demands. Your contacts name at Pruhart Tech is Diego Garcia.

You have received a customer complaint via the companys social media page. The customer is extremely dissatisfied, and the complaint has negatively impacted the companys image. The customers complaint is as follows: @Nasaquil does not work! My wife started Nasaquil and got very ill! I dont understand how big pharma companies get away with rolling out unsafe drugs that can hurt people! Dealing with all of the medical appointments and issues is bad enough, but this sickness . . . I cannot wait for the patient support meeting tomorrow to share this medications reaction. Maybe this drug shouldnt be approved yet.

Scenario 3:

You are a manager of a research company. Your research team has developed a transition package that allows a gas-powered engine to transition to running on biofuels. The availability and low cost of biofuels make the transition package a potential game changer in the automobile market. You have named the product Sparkit.

In addition to tests completed by your staff, you have partnered with a large automobile producer to ensure the transition package works with many different types of vehicles. The large automobile producer remains a partner in the product as a result of their involvement, and you anticipate that future vehicles from the producer may use the technology when initially built. With the producer’s assistance, you anticipate 50% of cars currently on the road can potentially be retrofitted with your product. The producer has created a guide for your sales force to ensure that Sparkit is not sold to customers whose cars are not compatible with the product.

This is the first big product developed by your company. Your sales and service teams do not have current relationships with potential buyers. One potential risk is that purchasers may choose to install the transition package on their own rather than choose a knowledgeable automotive professional to install it. You anticipate there may be issues with installation as a result.

The success of Sparkit relies upon an external partner, Autojor, who manufactures a filter critical to the proper operation of the transition package. As the result of a natural disaster, Autojor recently lost a manufacturing plant that was responsible for producing 25% of your inventory. You will need to work closely with this partner to ensure their manufacturing operation is able to continue supporting the just-in-time environment to meet sales demands. Your contacts name at Autojor is Mateo Kalani.

You have received a customer complaint via the companys social media page. The customer is extremely dissatisfied, and the complaint has negatively impacted the companys image. The customers complaint is as follows: I bought and installed Sparkit. It doesnt work! The instructions do not match my engines layout, and now my car doesnt work at all. This was supposed to save me money, but now my car wont run. Ill have to put more money into getting it fixed. This is ridiculous. I have told all my friends, and now I am telling the worlddo not buy this product! If you do, you will regret it.

REQUIREMENTS
Your submission must be your original work. No more than a combined total of 30% of the submission and no more than a 10% match to any one individual source can be directly quoted or closely paraphrased from sources, even if cited correctly. An originality report is provided when you submit your task that can be used as a guide.

You must use the rubric to direct the creation of your submission because it provides detailed criteria that will be used to evaluate your work. Each requirement below may be evaluated by more than one rubric aspect. The rubric aspect titles may contain hyperlinks to relevant portions of the course.

Create a portfolio of communication documents based on one of the scenarios by doing the following:

A.  Compose a motivational email to internal staff that discusses two advantages and two disadvantages of the product and explain how to mitigate the disadvantages should they occur.

B.  Compose an informational email to external stakeholders (i.e., investors, shareholders) that discusses two distinct organizational and/or financial impacts the product will create.

C.  Compose a consumer-facing blog post that highlights three distinct benefits of the product and informs the consumers what sets this product and/or business apart from others in the industry.

D.  Compose a persuasive letter to the business partner to discuss their challenges in meeting your production needs.

E.  Compose responses to the customer complaint about the product that was posted on the companys social media page by doing the following:

1.  Develop a public response that acknowledges the customer complaint and improves the company image within the social media page.

2.  Develop a direct private message with a proposed adjustment (resolution) for the customer.

F.  Evaluate the communication strategies and methods (i.e., email, letter, blog, and social media) used in items AE by doing the following:

Explain how the communication strategies support or do not support the desired outcomes and provide examples to support your conclusion.
Explain how the four communication methods effectively or ineffectively serve the target audience and provide examples to support your conclusion.

G.  Acknowledge sources, using in-text citations and references, for content that is quoted, paraphrased, or summarized.

H.  Demonstrate professional communication in the content and presentation of your submission.